Rogers RO4350B + High Tg FR-4 Hybrid PCB 4-Layer 1.0mm Mixed PCB on 4mil RO4350B and 0.3mm FR-4
(PCB’s are custom-made products, the picture and parameters shown
are just for reference)
Hi Everyone,
Today, we're going to talk about a type of 4-layer high frequency
PCB made on 4mil RO4350B pressed with FR-4.
The board is designed as a 4-layer structure, because 4-layer is
relatively simple and cost controllable, this is helpful to open up
a new market.
Let's take a look at first build-up,
The first layer to the second layer and the third layer to the
fourth layer are the Rogers core 4mil (0.102mm) RO4350B, the core
has fixed thickness which is very important to the electrical
length of RF lines on the circuit board, and the dielectric
material in the middle is FR-4 epoxy glass, which bonds both cores
on top and bottom side. Inner layer is 0.5 ounces and the outer
layer is 1 ounce.
The detailed specifications of this board are as follows:
Base material: RO4350B 0.102mm + Tg 170℃ FR4 0.30mm
Layer count: 4 layers
Panel: 55mm x 132mm = 1 type = 1 piece
Surface finish: Immersion gold
Copper weight: Outer layer 35 um/ Inner layer 18 um
Solder mask / Legend: green / white
Final PCB height: 1.0 mm
Special technology: via in pad (hole filled) under BGA
Standard: IPC 6012 Class 2
Packing: 25 panels are packed for shipment.
Lead time: 12 working days
Shelf life: 6 months
The applications of RO4350B hybrid PCB are wide, such as
preamplifier, radar sensors, digital transmitter and splitter
module; GPS antenna, communications relays, analogue transmitter
and 4G antennas; RF transmitter, WiFi amplifier, RFID and
attenuator etc.
The advantages of RO4350B hybrid PCBs:
1) RO4350B exhibits a stable dielectric constant over a broad
frequency range. This makes it an ideal substrate for broadband
applications;
2) Signal integrity performance improved over the stack-ups with
all FR4 board;
3) Cost reduced over stack-ups with all low loss material;
4) Reduce signal loss at high frequencies as well;
5) Benefit from our strong capabilities: meeting your PCB demands
from prototype mass production and IATF 16949 (2016), ISO14001
(2015), ISO9001 (2015) and UL certified factory guarantee your
quality.
That’s all of today. Thank you for your reading. You’re welcome to
contact us for your RF PCB enquiries.
