Brief Introduction
With the development of electronic communication technology, the
communication frequency is becoming higher and higher, and the high
frequency signal transmission, need to use low dielectric constant
(Dk), low dielectric loss (Df) but expensive special materials.
These materials have cyanate and high frequency materials such as
polytetrafluoroethylene / ceramic based materials (PTFE/Ceramic),
hydrocarbons / ceramic based materials (Hydra Carbon/Ceramic).
Usually these materials are expensive.
Reducing the cost is an important means for customers to improve
the competitiveness of products. Therefore, the customers adopt the
laminated structure of mixed materials in the design of PCB
structure, that is, the necessary signal layer uses high-frequency
materials to meet the needs of signal transmission. Other line
layers are made of conventional fiberglass epoxy FR-4, which we
call a hybrid board.
Available high frequency material (Core)
RO4350B RO4003C
4mil (0.1mm) 8mil (0.203mm)
6.6mil (0.168mm) 12mil (0.3mm)
10mil (0.254mm) 20mil (0.508mm)
13.3mil (0.338mm) 32mil (0.813mm)
20mil (0.508mm) 60mil (1.524mm)
30mil (0.762mm)
60mil (1.524mm)
PCB Case: Hybrid PCB Mixed Material PWB Built On 10 mil RO4350B+FR4
With Blind Via
(Printed circuit boards are custom-made products, the picture and
parameters shown are just for reference)
General description
This is a type of hybrid PCB built on RO4350B and FR-4 with 6 layer
stackup for the application of radar antenna. On the other hand,
it's not just 6 layer board which is directly designed from client.
The designer wants a double sided RO4350B circuit board combined
with a 4 layer circuit board.The 2 types PCB has it's own drill, so
the final PCB becomes a 6 layer PCB with blind via. Afer prcoess of
press,it leaves 1.8 mm thick. White silkscreen over green solder
mask is printed on board and immersion gold are plated on pads. The
base material is used from ITEQ IT-158 and Rogers 10mil RO4350B,
entire board supplying single up per panel. They're fabricated per
IPC 6012 Class 2 using supplied Gerber data. Each 25 panels are
packed for shipment.
Features and benefits
SI performance improvement over the stack-ups with all FR4 board;
Cost reduction over stack-ups with all low loss material;
Excellent surface planarity for CSP mounted components to reduce
failure rate during assembly and soldering;
High solderability, no stressing of circuit boards and less
contamination of PCB surface;
Experienced sales persons and skilled customer services;
No minimum order quantity and low cost sample;
Focus on low to medium volume production;
Quick turnaround prototype;
ISO9001, ISO14001, TS16949, UL Certified;
Application
Splitter, transmitter combiner , radio frequency, Tower Mounted
Amplifier
Parameter and data sheet
PCB SIZE | 75 x 110mm=1PCS |
BOARD TYPE | Multilayer PCB |
Number of Layers | 6 Layers |
Surface Mount Components | YES |
Through Hole Components | No |
LAYER STACKUP | Copper ------- 35um(1 oz)+plate TOP layer |
Dielectric RO4350B 0.254mm (10 mil) |
Copper ------- 35um(1oz) |
| PP+FR4+PP 0.695mm |
| Copper ------ 35um (1oz) |
| FR-4 0.25mm |
| Copper ------ 35um (1oz) |
| PP 0.21mm |
| Copper ------35um (1oz) |
| Dielectric RO4350B 0.254mm (10 mil) |
| Copper ------- 35um(1 oz)+plate BOT layer |
TECHNOLOGY | |
Minimum Trace and Space: | 4 mil / 5 mil |
Minimum / Maximum Holes: | 0.3 mm / 2.0 mm |
Number of Different Holes: | 12 |
Number of Drill Holes: | 167 |
Number of Milled Slots: | 0 |
Number of Internal Cutouts: | 3 |
Impedance Control: | no |
Number of Gold finger: | 0 |
BOARD MATERIAL | |
Glass Epoxy: | RO4350B Tg280℃, er<3.48, Rogers Corp. FR-4 IT158 |
Final foil external: | 1.5 oz |
Final foil internal: | 1 oz |
Final height of PCB: | 1.8 mm ±0.18mm |
PLATING AND COATING | |
Surface Finish | Immersion gold |
Solder Mask Apply To: | TOP, 12micron Minimum |
Solder Mask Color: | Green, PRS-2000GT600D, Taiyo Supplied. |
Solder Mask Type: | LPSM |
CONTOUR/CUTTING | Routing |
MARKING | |
Side of Component Legend | TOP |
Colour of Component Legend | White, IJR-4000 MW300, Taiyo brand |
Manufacturer Name or Logo: | Marked on the board in a conductor and leged FREE AREA |
VIA | Plated through hole(PTH), minimum size 0.3mm. Blind via L1-L2,
L3-L6 |
FLAMIBILITY RATING | UL 94-V0 Approval MIN. |
DIMENSION TOLERANCE | |
Outline dimension: | 0.0059" |
Board plating: | 0.0029" |
Drill tolerance: | 0.002" |
TEST | 100% Electrical Test prior shipment |
TYPE OF ARTWORK TO BE SUPPLIED | email file, Gerber RS-274-X, PCBDOC etc |
SERVICE AREA | Worldwide, Globally. |
Quality Policy
Bicheng has developed series of management procedures and
approaches to assure that PCBs are in compliance with the
customers' requirements, inclusive of selection of the vendors,
work in progress (WIP) inspection, outgoing delivery inspection and
customer service etc.
Evaluation and Audit of Suppliers
Suppliers have to be evaluated by Bicheng. In addition, Bicheng
will appraise and rank suppliers every year to guarantee the
materials supplied are meeting Bicheng’s requirements. Furthermore,
Bicheng continuously develop suppliers and supervise them to
improve their quality and environment management basing on the
systems of ISO9001 & ISO14001.
Contract Evaluation
Bicheng shall review and verify customer's requirements to make
sure that we have the capability to satisfy customers' requirements
including specifications, delivery and other demands prior to
accepting an order.
Making, audit and control of manufacturing data.
When customers' design data and specifications are provided to our
market department, Bicheng has to verify all the requirements.
Then, convert the design data into manufacturing data by CAM.
Finally, a manufacturing instruction (MI) is generated according to
the real manufacturing process and technologies for manufacturing
department as the basis for actual fabrication. MI must be reviewed
by independent engineers and QA engineers before issue.
Incoming Material Quality Control
All materials have to be inspected before warehousing. We
established a series of strict inspection procedure and instruction
to control the incoming materials. Furthermore, various precise
inspecting instruments and apparatus guarantee the capability to
judge the material good or not. We issue material with first in
first out principle, and give out “alarm” for the material that
will reach the shelf life to ensure the materials are used up
before expiry.
Control of Production Process
Right manufacturing instruction (MI), comprehensive equipment
management and maintenance and process control, strict WIP
inspection and monitoring as well as working instruction, all those
make the whole fabrication process totally controlled.
Final Control and Inspection
All PCBs have to be gone through the open and short test as well as
visual inspection after passed the specified physical tests. We own
various advanced test equipment including customized, probe flying
test machines to guarantee that each PCB is 100% tested.
Product Delivery Audit
We set up a dedicated FQA department to inspect the PCB products
according to the customer's specifications and requirements by
sampling. Qualified PCBs are going to be packed.
FQA also has to carry out a 100% audit of the warehouse packing and
shipping products, including product number, customer number,
product quantity, shipping address and so on prior to shipment.
Customer Service
We sets up a professional customer service team to proactively
communicate with customers and timely deal with the customers'
feedbacks. We highly focus on customers' needs and to understand
customers’ demands, timely to adjust the policy of customer service
and PCB product requirements.