High Frequency PCB Built on Taconic RF-35TC DK3.5 With 60mil Thick and Immersion Gold for Power Amplifier
(PCB's are custom-made products, the picture and parameters shown
are just for reference)
Hello Everyone,
Today, we introduce a type of high frequency PCB built on RF-35TC.
RF-35TC is a PTFE based, ceramic filled fiberglass high frequency
material from Taconic company.
PCB Specifications
| Layer count: | Double sided |
| Base material: | RF-35TC DK 3.5 |
| Dimension: | 105 x 87mm |
| Finished thickness | 1.6mm ±10% |
| Finished Copper weight: | 2 oz |
| SMOBC: | No |
| Surface finish: | Immersion Gold |
Double sided, substrate is RF-35TC, DK at 3.5; 105mm long by 87mm
wide; finished PCB thickness at 1.6mm, finished copper weight at
2oz; No solder mask and silkscreen; surface finish is Immersion
gold
This is the stack up drawing.
Top layer and bottom layer are 2oz finished copper, dielectric
material RF-35TC is in the middle at 1.524mm thick, DK at 3.5
The basic colour of RF-35TC PCB is brown and grey. Its main
applications are power amplifiers, couplers and filters. In
addition, It’s also widely used in antennas, satellite equipment
and so on.
Our PCB Capability (RF-35TC)
| PCB Material: | PTFE based ceramic filled fiberglass substrate |
| Designator: | RF-35TC |
| Dielectric constant @ 10GHz: | 3.50 |
|
| Layer count: | 2 Layer, Multilayer, Hybrid type |
| Copper weight: | 0.5oz, 1oz, 2oz |
| PCB thickness: | 0.3mm, 0.6mm, 0.8mm, 1.6mm |
| (10mil, 20mil, 30mil, 60mil substrate) |
| Solder mask: | Green, Red, Black, White, Blue etc. |
| PCB size: | ≤400mm X 500mm |
| Surface finish: | Bare copper, HASL, ENIG, Immersion tin etc. |
| | |
We can provide you with double sided board, multilayer board and
hybrid board. Thickness ranges from 0.3mm to 1.6mm, maximum size at
400 mm by 500mm; there’re surface finishes of bare copper, hot air
level, immersion gold etc.
RF-35TC offers superior heat dissipation performance, so it's a
type of thermally conductive low loss laminate. It's best suited
for high power applications. Heat dissipates away from both
transmission line on PCB and surface mount components such as
capacitor etc.
Should you have any questions, please feel free to contact us.
Thank you for reading.
Appendix: Data sheet RF-35TC
