Taconic 125mil 3.2mm RF-60A RF PCB With Immersion Gold For Passive Components

(Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference)

RF-60A is an organic-ceramic laminate in the ORganic CERamic(ORCER) family of Taconic products. It's based on woven glass reinforcement. It is a result of Taconic's expertise in both ceramic fill technology and in coated PTFE fiberglass. RF-60A exhibits exceptional interlaminar bond strength and solder resistance. Its proprietary composition results in low moisture absorption and uniform electrical properties.

RF-60A's woven glass reinforcement ensures excellent dimensional stability and enhances flexural strength. It exhibits low Z-axis expansion allowing for plated-through-hole reliablity in extreme thermal environments. With a dielectric constant of approximately 6.15, it is ideal high DK products for applications requiring reduced circuit size and weight. The low electrical loss factor makes it an excellent selection for RF circuits.

RF-60A laminates are in complete compliance with RoHS and WEEE directives and are compatible with the temperatures required for the new lead free solders. They can be sheared, drilled, milled and plated using standard methods for PTFE-woven fiberglass materials, so mass production becomes possible.

Our PCB Capabilities (RF-60A)

Benefits (in general):

Low Moisture Absorption

Stable DK over Frequency

Dimensionally Stable

Low Z-axis Expansion

High Flexural Strength

Exceptional Interlaminar Bonds

Typical Applications:

Power Amplifiers

Filters & Couplers

Passive Components

Antennas

Data Sheet of Taconic RF-60A