Taconic RF-35TC High Frequency PCB With 10mil, 20mil, 30mil and
60mil Thick Coating Immersion Gold, Immersion Silver and Immersion
Tin
(PCB's are custom-made products, the picture and parameters shown
are just for reference)
Hello Everyone,
Today, we introduce high frequency PCB built on RF-35TC.
RF-35TC is a PTFE based, ceramic filled fiberglass high frequency
material from Taconic company.
First, take a look at some of its advantages:
Exceptional thermal management
This material offers superior heat dissipation performance, so it's
a type of thermally conductive low loss laminate. It's best suited
for high power applications. Heat dissipates away from both
transmission line on PCB and surface mount components such as
capacitor etc.
Similarly, Dk stability is across a broad temperature range;
antenna gains and efficiencies are enhanced, RF-35TC bonds very
well to Low Profile copper, reducing insertion loss.
Going back to the table, let’s take a look at its main
applications:
1. Power amplifiers: The extremely low Df of 0.0011 and high
thermal conductivity are particular suited for power amplifier
applications.
2. Couplers: The Low Z axis CTE and temperature stable Dk are
critical for both narrow and broad band overlay couplers.
3. Filters: The low X and Y CTE values are crucial for maintaining
critical distances between trace elements in a printed filter
In addition, It’s also widely used in antennas, satellite equipment
and so on. Next, let’s take a look at our PCB capabilities.
Our PCB Capability (RF-35TC)
| PCB Material: | PTFE based ceramic filled fiberglass substrate | |
| Designator: | RF-35TC | |
| Dielectric constant @ 10GHz: | 3.50 | |
|
| Layer count: | 1 Layer, 2 Layer, Multilayer, Hybrid type | |
| Copper weight: | 0.5oz, 1oz, 2oz | |
| PCB thickness: | 0.3mm, 0.6mm, 0.8mm, 1.6mm | |
| (10mil, 20mil, 30mil, 60mil substrate) | |
| Solder mask: | Green, Red, Black, White, Blue etc. | |
| PCB size: | ≤400mm X 500mm | |
| Surface finish: | Bare copper, HASL, ENIG, Immersion tin etc. | |
| | | |
At present, our company can provide single sided PCB, double sided
PCB, multi-layer PCB and hybrid PCB.
The copper thickness is mainly 1oz and 2oz.
According to different uses, there are many kinds of thickness to
choose from, such as 0.3mm, 0.6mm, 0.8mm and 1.6mm.
The color of solder mask is available in green, red, black, white
and blue etc.
Our maximum PCB size is within 400X 500mm.
A variety of surface finishes are available, such as bare copper,
Hot air level, immersion gold and immersion tin .
The basic colour of RF-35TC PCB is brown and grey.
Our company focuses on prototypes, small batch and mass production.
Should you have any questions, please feel free to contact us.
Thank you for reading.
Appendix: Data Sheet RF-35TC
